Program Your Remote Fob

1. Turn switch to "ON" at the back of your handle. Then, press and release the "FOB LEARN" button located next to the ON/OFF switch. A short, quick beep will confirm that the handle has entered programming mode.

2. Press & release a "LOCK" button on your remote until the handle confirms a sync with a long beep. (May take 2 - 3 clicks).

3. Finally, press the "LOCK/UNLOCK" button to confirm the successful actuation of your handle.

*If programming did not work, or if you have additional remotes to program, simply repeat steps above.

All Fobs have 2 lock/unlock functions.

All Remotes have 4 lock/unlock functions.

*Holding down the "LEARN" button for 10 seconds (or until you hear a beep) will remove all previously synced remotes from the handles memory.

NOTE:

Up to 10 remote fobs can operate the same RVLock Keyless Handle. Remote fobs also have the ability to control multiple RVLock Keyless Handles.