RVLock Compact Motor Installation

Edited

RVLock Compact Motor Installation

  1. Remove the lock from the door by unscrewing the four screws in the back of the lock and two in the side of the door.

  2. Place the lock face down on a clean surface.

  3. Remove the four screws from the silver plate.

  4. Remove the silver rod, the clutch and the deadbolt.

  5. Remove the two screws from the motor cover.

  6. Remove the motor from the housing and clean off the green adhesive to disconnect the wires. 

  7. Repeat the steps in reverse to install the new motor. (Additional green adhesive not required for installation)

    658809516019-removebg-preview__2__copy.png

    658809518019-removebg-preview_copy.png

    658820408019-removebg-preview__1__copy.png

    658809517019-removebg-preview_copy.png