RVLock V4 PCB Installation

Edited

Installing A New PCB On An RVLock V4:

  1. Remove the Four Screws in the back portion of the lock.

  2. Disconnect the red and white wires

  3. Remove the battery compartment screws 

  4. Remove the 4 AA batteries 

  5. Remove the two PCB housing screws 

  6. While pushing the "ON/OFF" button down below the frame, push out on the battery compartment. 

  7. Remove PCB from housing

  8. Disconnect the red and black wire 

  9. Connect he red and black wire to the new PCB 

  10. Insert PCB into housing

  11. Replace the PCB cover

Note: If you have a Compact or Class C/A lock click here

613505520019-removebg-preview.png

613505523019-removebg-preview-2.png

 

Tags: Circuitry, board, replacement PCB, Replacing PCB