Programming

The different sets of buttons on the remote fob are intended for our customers that have multiple RVLock keyless entry locks on their rig. If you only...

The 8 Button Master Remote can be programmed with up to 15 RVLock keyless products.

Yes! Each keyless handle can be synced to up to 10 fobs at once. You will need to connect each fob to each RVLock individually.

1. Turn switch to "ON" at the back of your handle. Then, press and release the "FOB LEARN" button located next to the ON/OFF switch. A short, quick be...

PLEASE READ : You will have 10 seconds to complete steps 1-5. Hold down the "8" button, do not release. While holding down the "8" button, press and h...

Hold down the code reset button until you get a beep.  Type in your NEW CODE and press "LOCK" Again, type in your NEW CODE and press "LOCK" - this wil...

Programming A New Code Into Your RVLock 10 Digit Keypad *(DO NOT press the learn button on the handle for this process) Note: The beeps can be a hard ...

Your lock should not operate while going through the programming steps . If this is happening, the lock is not getting into the programming mode. Try...

The beep to enter programming mode is an indication of entering programming mode however, it is not necessary. In addition to the programming beep bei...

Open your door to expose the back portion of the lock. Using a pen, paper clip or another small tool, hold down the "Code Reset" button for 10 seconds...

Connecting the BT Pro Module to your phone:  On the RVLock app, press the plus(+) sign in the top left corner. Click “Add New Device”. Press and hold ...

NOTE: Some phone operating systems may have different instructions.    iPhone: Open Settings > Bluetooth and turn off the switch beside Bluetooth.   A...